Knowledge Center

Results & Reporting · 2 MIN READ

Purity, Identity and Content Are Not the Same Thing

A vial can be 99 % pure and still be the wrong compound, or half empty. Three questions, three measurements.

Yuri Parounakian · 8 Aug 2026

Purity, Identity and Content Are Not the Same Thing

A vial can be 99 % pure and still contain the wrong compound. It can also be 99 % pure and hold 6 mg where the label says 10. That sounds strange until you see that these are three separate measurements.

Amber sample vials in a rack in our lab
Sample vials in our lab.
01

Purity: how clean is it?

HPLC separates the sample and the UV detector shows every compound as a peak. Purity is the share of the main peak in all sample-related peaks at 214 nm. It says the sample is clean. It does not say what the main peak is.

02

Identity: is it the compound on the label?

Our mass spectrometer measures the mass of the molecule as it comes off the column. Identity is confirmed only when two things match our reference standard for that compound: the mass and the retention time. More in Why HPLC Alone Cannot Confirm Compound Identity.

03

Content: how much is in the vial?

We weigh and dissolve your sample and measure it against a calibration with a reference standard of known content. The result is in mg per vial, so you can put it next to the amount on the label.

04

One vial, three answers

Question Measured by Result
How clean is it? HPLC, UV at 214 nm Purity in % of the UV signal
Is it the right compound? LC–MS and retention time Identity confirmed or not
How much is there? Calibration with a reference standard mg per vial

A result can look like this: 99.30 % purity, identity confirmed, 7.4 mg in a vial labelled 10 mg. Clean and genuine, but underfilled. Only all three together tell you that.

Purity is included with every single-peptide test; Identity & Content is one option on top. See Testing Services or test a sample.

Keep reading